Car Dashboard Magnetic Sensors

Sensors are used everywhere from vehicle engine management systems to Smartphones determining if the flip cover accessory is closed. Modern everyday life would be very different without sensors and the operation of many of these sensors rely on magnetism. As products evolve, so have the range and specification of sensor magnets. A magnetic sensor converts…

Read More
Bunting at Cenex LCV 19

Cenex-LCV is the UK’s premier low carbon vehicle event and the 2019 show was held at Millbrook in Bedfordshire, UK (4-5 September 2019).  After exhibiting at the event for the second consecutive year, Matthew Swallow, our Technical Product Manager for Magnetic Assemblies reviews the event. Bunting’s Stand At Cenex LCV 2019 “For Bunting, the Cenex-LCV event…

Read More
Hybrid Electric Vehicle

Grain Boundary Diffused Neodymium Magnets, Magnetisers and Magnet Setters are the focus for Bunting on stand C109 at this year’s Cenex LCV show (4th – 5th September, Millbrook, Bedfordshire, UK). Cenex-LCV is the UK’s premier low carbon vehicle event.  The show features an extensive seminar programme and the opportunity to ride & drive the latest…

Read More
Apollo_11

2019 marks the 50th anniversary of when mankind first stepped onto the surface of the moon.  However, not many people know that this momentous achievement would not have been possible without magnets.  In this article, we review the important role of magnets in space. The guidance and navigation system computers for the Apollo 11 spacecraft…

Read More
Magnets to NASA

Bunting is thrilled to have been selected as the supplier of high specification grain boundary diffused Neodymium Iron Boron (NdFeB) Magnets for a NASA project. Grain Boundary Diffusion (GBD) technology enables the heavy rare earth element Dysprosium to diffuse from the surface of a grain around all of the grains boundaries.  Dysprosium is added to Neodymium…

Read More
UK Mag Soc LEGO Event

Matthew Swallow, our Technical Product Manager for magnets and magnetic assemblies, recently attended the UK Magnetics Society’s ‘Magnetic Measurement and Sensors’ event held at the LEGO House in Billund, Denmark (21-22 March 2019).  The event was sponsored by Bunting Magnetics.  Matthew reports back on the exciting and informative two-day event. “It is not often that…

Read More
Southern Manufacturing and Electronics 2017

Bunting Magnetics Europe Attract Visitors to Stand P225 Magnets, Magnetic Assemblies and Factory Magnetic Solutions will be on show on stand P225 at this year’s Southern Manufacturing & Electronics (5-7 February 2019, Farnborough International Exhibition and Conference Centre, UK). Southern Manufacturing and Electronics is promoted as the most comprehensive annual industrial exhibition in the UK. …

Read More

Bunting Magnetics and eMagnets Report Growth in 2018 The demand for magnets, magnetic assemblies and magnetising equipment reached new heights in 2018.  The European operation’s sales were 25% higher than in 2017. “As an engineering and manufacturing company, we are very proud of our achievements in 2018,” said our Managing Director, Simon Ayling.  “We have…

Read More
Engineering design show 2019

Changing Manufacturing Techniques To Reduce Cost Bunting’s engineering design team was asked by a customer to reduce the cost of a magnet assembly.  The magnet assembly formed part of a magnetic coupling with a specific torque ratio.  However, due to the manufacturing process, the cost of assembly was high.  Subsequently, the team looked at an…

Read More

High Strength Magnets – Low Carbon Vehicle Event The most advanced high strength magnet technology will be on show on the Bunting Magnetics stand C1-14 at the Cenex-LCV 2018 event (Millbrook, Bedfordshire, UK, 12th and 13th September 2018).  Cenex-LCV is the UK’s premier low carbon vehicle event.  There is an exhibition area as well as an…

Read More