Magnetic Separation and Metal Detection

MAGNETIC SEPARATION & METAL DETECTION

Solutions for many applications across various industries including food, pharmaceutical, plastics, recycling, aggregate, quarrying powder and bulk industries and more...

Magnetic Separation and Metal Detection
Magnetic Separation and Metal Detection

MAGNETS & MAGNETIC PRODUCTS

As a provider of Total magnetic Solutions we have been supplying permanent and holding magnets into a wide range of industries for over 50 years.

Magnetic Separation and Metal Detection

MAGNET PRODUCTION & MAGNET ASSEMBLIES

A world leader in the design and manufacture of permanent magnets, magnetisation and magnet assemblies.

Magnet production and magnet assemblies
Magnetic Separation and Metal Detection

FOR ONLINE MAGNET SALES VISIT OUR ECOMMERCE BUSINESSS E-MAGNETSUK.COM

  • Online Shop - Next day delivery
  • Volume pricing available on Line
  • Magnet selection tools and Technical advice line
  • Awarded "Excellent" 5 Stars from Trustpilot
Magnetic Separation and Metal Detection

NOW A SINGLE MAGNETIC SEPARATION SOURCE

  • Bunting Magnetics Europe acquires Master Magnets
  • Click learn more below for more details

BMLC Series – Laboratory/Small Scale Production

The BMLC Series is ideally suited for laboratories or small-scale production. They have a workbench area on top of the unit where the fixtures are placed for operation and either hard wired in for permanent installations or connected by quick release plugs for environments where many different fixtures may be used. They can be fitted with a standard push button control panel or with an HMI Interface if preferred.

Standard safety interlocks prevent fixtures from being operated when over temperature.

For situations where multiple magnetizing fixtures may be used, additional safety interlocks are recommended. The process of setting individual fixture parameters can be automated such that all the operating parameters are stored in the fixture control plug, which once connected to the magnetizer, automatically sets the machine ready for production. This prevents fixtures from ever being operated at too high a voltage or when over temperature which could damage the magnetizing fixture.

These magnetizers are particular suitable for magnetizing small multipole magnets up to diameters of approximately 50mm, fine pole pitch magnetisation, and more general 2 pole magnetization of most permanent magnet materials including rare earths.

Laboratory-Bench-Top-Magnetisers

Key Benefits

Laboratory / Small Scale Production

Desktop / WorkStation Design

Quick release fixture outputs for highly flexible operation

Optional Automated Fixture Setting Feature

PLC controlled with remote LAN access for maintenance or production control

Specification

Power Supply: 110Vac /230Vac

Standard Output Voltages: 3000V

Discharge Energy: 1 – 4kJ

Maximum Peak Current: ~20kA

Charge Rate: 500J/s

Standard PLC Controller Siemens s7-1200

Typical Applications

Small NdFeB / SmCo Magnets

Ferrite and AlNiCo Magnets

Multipole Rings or Rotors up to ~50mm

Encoder / Sensor Magnetization